background image

LOW Temperature (LO)-- Indoor HIGH Temperature (HI)--Indoor LOW 
Temperature(LO).

      

After selecting, press “UP” to arm (      icon is appeared) the alert if 

you wish to set it and press “DOWN” to turn off the alert (leave alert 
OFF to skip and move to next alert).

      

When the alert is armed (ON) press and hold the “ALERTS” button 

to move to the alert value (The value is flashing).

      

Press “UP” or “DOWN” buttons to adjust the alert values.

      

Press the “ALERTS” button to confirm&move to the next alert.

12

ALERTS

1

2

3

4

5

6

7

8

9

When no HI or LO Temperature

Alert is set, OFF will show.

Short press “ALERTS” button to 

set Outdoor HIGH Temperature (HI)

Then short press “ALERTS” button

to set Outdoor LOW Temperature (LO)

Press“UP”to arm

(       icon is appeared)

Press “UP” and “DOWN” to adjust

the value 

After setting, the HI and LO icon is

appeared

Press and hold the “ALERTS” button 

 to set the alert value

Repeat the same step to set Indoor

HIGH/LOW Temperature

Press“UP”to arm

 (        icon is appeared)

ALERTS

ALERTS

ALERTS

SNOOZE

LIGHT

DOWN

Summary of Contents for EN8829A



















Reviews: