PLEASE NOTE:
The screws provided with Bankston products are made from solid brass. This allows
finishes to be matched as closely as possible and prevents the possibility of screws
rusting in coastal areas.
Please note that screws require pre-drilling.
Please take extra care when fitting.
IMPORTANT:
Please install this door hardware in the
following order to ensure its warranty is
not voided.
1.
Install the door hardware on
raw / unfinished door using the
instructions provided.
2. Remove door hardware and store
safely. Do not place painters tape
or masking tape over the product.
The tape will damage the finish.
3. Paint / finish door.
4. Reinstall hardware.
Please recycle
me after use
Included:
Not Included:
1. Euro Plate Handle Set
4. Tie Bolts
3. Wood Screws
2. Split Spindle
5. Standard Spindle
Plate Euro Set
Standard
1.
4. (or 3.)
2.
6.1.
Insert thumb turn euro cylinder through the lock
body and fix with the appropriately sized cylinder
screw provided.
—
*If required, refer to suppliers instructions.
6. Install Euro Cylinder (Thumb turn)
