BANLAW PRODUCT DATA SHEET
DRY-BREAK DIESEL REFUELLING NOZZLES
Doc ID: PRH-REF-70 Version: 7.0
Page
8
of
32
Please ensure you have the latest version of this document.
NOTES:
1. Not all Models are available ex-stock and are made to order.
2. Each Model is available with select spring (i.e. shut-off pressure) settings.
Not every spring
setting is available in each Model.
3. Nozzle availability is subject to change
–
please refer to the Banlaw website or contact Banlaw
or your nearest authorised Banlaw distributor for the most up to date details.
Figure 8 illustrates the location on a Nozzle where the model and unique serial code details are marked.
Figure 8
–
Example of Model and Serial Details on Right Side of Nozzle
1.6
Nozzle Spring Settings
Each Nozzle is available with a
pre-set
spring setting, specifically the setting (specification) of the piston
spring. Banlaw document
EBL-33
provides further important information on spring settings.
Selection of the required Spring Setting should be performed prior to purchase of a
Nozzle.
Any adjustment of the Spring Setting within a Nozzle must only be
conducted by Banlaw or a Banlaw authorised Nozzle Repair Agent.
The use of a
Nozzle with an inappropriate Spring Setting is potentially unsafe, and likely to
increase the risk level of hazards such as:
•
Overfilling of the tank(s).
•
Internal over-pressurisation of the tank(s).
•
Fuel spillage.
•
Personal injury, fire, or explosion.
Please conduct Banlaw for information on Nozzle Spring Settings.
“IF IN DOUBT, ASK!”
Available spring settings are detailed within Table 2.
Shut-Off (Spring) Setting
Nozzle Series
Setting
Code/Marking
800 Series
1000 Series
Light
L
Medium-Light
ML
Medium
M
Medium-Heavy
MH
Heavy
H
Extra-Heavy
XH
Table 2 - Available Nozzle Shut-Off (Spring) Settings
Table 2 Legend:
Yes (available)
No (unavailable)
