Roller Pressure Adjustment
To Open the Rollers:
Pull out the pin and turn handle clockwise until it will not turn any
farther and the pin locks into place.
To Mount:
From the OPEN position, pull out the pin and turn handle counter-clockwise
until pin locks into place. The front pressure adjustment handle has two positions for
mounting; 3/16” and 1/2”. The rear pressure adjustment handle has one mount position for
both board thicknesses. From the CLOSE position, turn the handle clockwise.
To Close the Rollers:
Pull out the pin and turn the handle counter-clockwise until it will not
turn any farther and the pin locks into place.
Front
Rear
to
OPEN
turn
clockwise
to
CLOSE
turn
counter-
clockwise
MOUNT
3/16”
1/2”
PIN
to
OPEN
turn
clockwise
to
CLOSE
turn
counter-
clockwise
MOUNT
PIN
2
abcoffice
800-658-8788
