1 Product Description
Imager-based barcode reader with superior decoding capability and a powerful array of lens and lighting options
• Powerful decoding capability to read even difficult 1D and 2D codes
• Superior ability to read DPM and low contrast codes
• Industrial IP67 metal housing for factory environments
• Autofocus or manual focus models available for ease of setup and
configuration
• Quick configuration with push buttons or software interface
• Ethernet and serial communications for connection to the factory floor
• Powerful integrated LED lighting and easy focus adjustment in one
package for maximum application flexibility
• Green "good read" and red "no read" feedback spotlights and beeper for
easy monitoring
• Easy, multi-head system connection to multiply barcode reading power
• Embedded webserver interface for monitoring images and statistics over
any network
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury
or death. This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
1.1 Models
Table 1: ABR 7000 Models
Model
Resolution
Lens
Lighting
Options
Communications
Codes
ABR7109-RSE2
1.3 MP
(1280x1024
pixels)
9 mm, manual focus
Red
Standard
Serial/Ethernet
1D and 2D
ABR7109-MSE2
9 mm, manual focus
Multicolored DPM2
ABR7112-RSE2
12 mm, manual focus
Red
ABR7116-RSE2
16 mm, manual focus
Red
ABR7106-RSE2
6 mm, manual focus
Red
ABR7106-MSE2
6 mm, manual focus
Multicolored DPM2
ABR71L9-RSE2
9 mm, Liquid Lens
Autofocus
Red
ABR71L9-MSE2
9 mm, Liquid Lens
Autofocus
Multicolored DPM2
1.2 Laser Description and Safety Information
The ABR 7000 internal illuminators contain two aiming Laser LEDs used to position the reader. Disconnect the power
supply when opening the device during maintenance or installation to avoid exposure to hazardous laser light. The laser
beam can be switched on or off through a software command.
This product conforms to the applicable requirements of IEC 60825-1 and complies with 21 CFR 1040.10 except for
deviations pursuant to Laser Notice N° 50, date June 24, 2007. This product is classified as a Class 2 laser product
according to IEC 60825-1 regulations.
2 Multicolored DPM models have red and blue lights for optimized reading of DPM codes.
ABR 7000 Series Barcode Reader
4
www.bannerengineering.com - Tel: + 1 888 373 6767