6. Click Start Automatic Setup. The Automatic Setup window opens.
Figure 52. Automatic Setup
7. Select the correct reading conditions.
• Static Tuning—No maximum limit on exposure time
• Dynamic Tuning—Maximum allowable image exposure is automatically calculated using the parameters
• 1D code
• 2D code
• Include Image Filtering—Select to find the best decoding condition.
8. Click Start.
The reader begins acquiring images, adjusting the brightness and focus (for liquid lens autofocus models), and
adjusting the decoding settings to find a barcode and optimize reading for the first code it finds. At the end of the
procedure the Status: Completed message displays.
9. Close the Automatic Setup window.
Your reader is now optimized for decoding. Continue setting up the reader for your application as desired. Typically,
Reading Phase is configured next. See
on page 50.
6.2 Advanced Setup for Liquid Lens Autofocus Models
Advanced Setup provides access to the complete array of optical/illumination and code definition parameters that can be
fine-tuned semi-automatically and manually to obtain the best results for applications of any complexity. If your application
requires multiple code symbologies, multiple image settings, Code Grading, or other parameter settings for decoding, use
the Advanced Setup.
To begin configuration, the reader must be correctly mounted at the correct reading distance for your application so that its
Field of View covers the application reading area.
Note: For manual adjustable focus models go to
Advanced Setup for Manual Adjustable Focus Models
page 46.
1. From the Task Area select Open Device Configuration.
The Open Device Configuration window opens showing the list of currently saved configurations (jobs) saved on the
device. For new devices, the only saved job is the Default configuration.
2. Click OK.
The device enters run mode and begins acquiring images.
3. Click Advanced Setup.
4. Click the Play icon.
5. Place the PPI (Pixels per Inch) Setup Chart in the reading area.
ABR 7000 Series Barcode Reader
www.bannerengineering.com - Tel: + 1 888 373 6767
43
