CAUTION: Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure. Do not attempt to disassemble this sensor for
repair. A defective unit must be returned to the manufacturer.
For Safe Laser Use - Class 2 Lasers
• Do not stare at the laser.
• Do not point the laser at a person’s eye.
• Mount open laser beam paths either above or below eye level, where
practical.
• Terminate the beam emitted by the laser product at the end of its useful
path.
Reference IEC 60825-1:2007, Section 8.2.
CAUTION: Never stare directly into the sensor lens. Laser
light can damage your eyes. Avoid placing any mirror-like
object in the beam. Never use a mirror as a retroreflective
target.
Class 2 Lasers
Class 2 lasers are lasers that emit visible radiation in the wavelength range from
400 nm to 700 nm, where eye protection is normally afforded by aversion
responses, including the blink reflex. This reaction may be expected to provide
adequate protection under reasonably foreseeable conditions of operation,
including the use of optical instruments for intrabeam viewing.
Class 2 Laser Safety Notes
Low-power lasers are, by definition, incapable of causing eye injury within the
duration of a blink (aversion response) of 0.25 seconds. They also must emit only
visible wavelengths (400 to 700 nm). Therefore, an ocular hazard may exist only if
individuals overcome their natural aversion to bright light and stare directly into
the laser beam.
R
C
US
Complies with 21 CFR 1040. 10
except for deviations pursuant
to Laser Notice N°50.
date June 24, 2007
LASER LIGHT - DO NOT ST ARE INTO BEAM
CLAS S 2 LASER PRODUCT
MAX .OUTPUT RADIA TION 1 mW
EMIT TED W AVE LENG TH 630 ~ 680 nm
IEC 60825-1: 2007
www.bannerengineering.com
ABR Series
AVOID EXPOSURE LASER LIGHT
IS EMITTED FROM THIS APERTURE
Laser wavelength: 630-680 nm
Output: 1 mW
Pulse Duration: variable
1.3 Features
1
2
3
4
5
6
8
10
9
11
13
12
7
Figure 1. Models with Manual Adjustable Focus
1. Smart Teach Interface
2. Button
3. Good Read LED (green)
4. Internal Illuminator
5. Aiming System Laser
Pointers
6. Lens
7. No Read LED (red)
8. Lens Cover
9. Focus Adjustment Screw
10. Power - Serial - I/O
Connector
11. Ethernet Connector
12. Power ON LED
13. Ethernet Connection LED
1
2
3
4
5
6
8
10
11
13
12
7
Figure 2. Models with Liquid Lens Autofocus
ABR 7000 Series Barcode Reader
www.bannerengineering.com - Tel: + 1 888 373 6767
5
