3. Under Deactivation, select the same input and set the polarity to Trailing.
When physical Input 1 turns on, the Industrial Ethernet host controller will see the ABR Output Bit 0 turn on.
Input 1 echo to Industrial
Ethernet Master on
Reader Output Bit 0
Figure 76. Digital Intput Echo to Industrial Ethernet
8.1.6 Transmitting Output Data Messages Using Industrial Ethernet
To send the result output data from the ABR to the Industrial Ethernet host controller, use the following steps:
1. Go to Output Setup.
Should step 1 be Data Formatting rather than Output Setup?
2. Click on the Message you wish to send.
ABR 7000 Series Barcode Reader
www.bannerengineering.com - Tel: + 1 888 373 6767
63