8.2.4
ABR
Series Manual Installation in Studio 5000 Logix Designer
Software
If the EDS file installation in the previous section is not possible, follow the steps of this section. Otherwise skip this section.
1. Add a generic Ethernet module to the PLC's Ethernet card.
a) Click New Module.
Figure 89. Add Ethernet Module
b) Select Generic Ethernet Module.
Figure 90. Select Module Type
2. Configure the Module Properties, including the Name and IP Address of your choice, and using the Connection
Parameters and Comm Format shown.
Figure 91. Module Properties
ABR 7000 Series Barcode Reader
www.bannerengineering.com - Tel: + 1 888 373 6767
73