2. Click on the drop-down arrow next to the cellular carrier to expose the
ICCID
and
IMEI
entry fields.
3. Select the appropriate cellular carrier for your kit.
•
For a kit model number ending in
-V
, select
Verizon
.
•
For a kit model number ending in
-A
, select
AT&T
.
4. Enter the
ICCID
and
IMEI
numbers.
The ICCID and IMEI numbers are on the back label of the DXM.
5. Refresh the page as prompted.
The device appears under the carrier line of service with a
Status
of
Active
.
It can take up to five minutes for the cellular module to be recognized by the network. Please wait until
Status
has changed
to
Active
before proceeding. You will also receive a confirmation email that your device has been activated.
The DXM is now connected to the cellular network.
5.2 Banner Cloud Data Services (BannerCDS)
5.2.1 Activate Cloud Services
Follow these instructions to activate your cloud services account.
1. Go to the
2. Register your account by going to the
Sign Up
menu.
3. Select
Enter Authorization Code and Create Account
.
4. Enter the requested information. The authorization code is on the Authorization Card included with your kit.
5. Read and accept the Services Access and Use Agreement.
5.2.2 Create a New Gateway
After you log into the Banner Cloud Data Services website, the
Gateway
screen displays. Follow these steps to create a new
monitoring site.
1. Click on
+New Gateway
.
Create a new Gateway/site for each device that will be sending data to the web server.
A
Create New Gateway
prompt appears.
2. Verify
Traditional
is selected for the
Configuration
.
DXM Enclosure Kit (DEK) Series
16
www.bannerengineering.com - Tel: + 1 888 373 6767