3. Enter a site name.
4. Click
Create
.
The Gateway/Site appears in the listing of devices on the Gateways screen.
5. Click
Edit Gateway
(pencil icon) next to your Gateway/Site name.
The Gateway detail window appears.
6. Copy the
Site ID
number located at the top of this window.
The Site ID number created by the web server is a required parameter in the configuration of the DXM. The Site ID is
the address the webserver uses to store the data pushed from the DXM.
7. Click
Save
.
5.2.3 Modifying the XML Configuration File
Use the DXM Configuration Software to configure the operation of the DXM.
Launch the software. You can use one of these three screens to modify registers:
•
Local Registers
—Edits individual registers
•
Modify Multiple Registers
—Edits multiple registers at the same time
•
Local Registers in Use
—Edits individual registers
DXM Configuration Software Instruction Manual
(p/n 209933) for more details.
5.2.4 Configure the Cloud Data Services Settings
1. To configure the connection to the web server, go to the
Settings
>
Cloud Services
screen.
2. Copy and paste the
Site ID
.
The Site ID is that long string of numbers and letters from the Banner Cloud Data Services website.
3. Verify the
Server Name/IP
is set to
push.bannercds.com
and the
Page
is set to
/push.aspx
for sending to the
website.
4. Set the
Cloud Push Interval
to a value appropriate for your application.
The
Cloud Push Interval
determines how often the device pushes the data to the web. The faster the push interval,
the more data is sent to the site. Cellular plans can only push at an interval of 10 minutes or longer. The
Sample
Count
specifies how many times the data is gathered within the
Cloud Push Interval
.
For example, if the
Cloud Push Interval
is 15 minutes and the
Sample Count
is set to 3, then during each data push
(every 15 minutes), 3 samples are sent to the web. This is one sample every 5 minutes.
5. Set the
Push Method
to
HTTP Cloud Push
and the
Push Interface
to
Cell
.
6. On the
Cellular
screen, select the appropriate
Cell Module
.
•
Select
SXI-CATM1VZW-001
for kit model numbers ending in
-V
•
Select
SXI-CATM1ATT-001
for kit model numbers ending in
-A
The
APN
will automatically change accordingly.
7. Save the configuration file by going to
File
>
Save
.
File names must be no more than 30 characters long, and should not contain any spaces or special characters.
8. With a USB cable connected to the device, go to the
Device
>
Connection Settings
menu.
DXM Enclosure Kit (DEK) Series
www.bannerengineering.com - Tel: + 1 888 373 6767
17
