February 02, 2024
DXM1200-X2 Controller Instruction Manual
© Banner Engineering Corp. All rights reserved.
7
•
•
•
•
•
•
User-Defined RGB indicator
Indicates the status of processes and alarm states
DXM1200-X2 Models Key
Model Family
Base
-
Base
Radio Configuration
DXM1200
-
X2
R1
Blank - Low-profile housing
One 4-pin female M12 D Code Ethernet
connector
Four female M12 connectors for Modbus
client connections
One 5-pin male M12 power and RS-485
connector
X2 - Modbus controller for data
aggregation of sensors and wireless
networks with external ISM and
cellular antennas
Blank - None
R1 - 900 MHz, 500 mW PE5 Performance Radio (North America)
R2 - 900 MHz, 500 mW HE5 MultiHop Data Radio (North
America)
R3 - 2.4 GHz, 65 mW PE5 Performance Radio (Worldwide)
R4 - 2.4 GHz, 65 mW HE5 MultiHop Data Radio (Worldwide)
Custom products are available and are designated with a 6-digit number following the standard model number, such as
DXM1200-X2R1-123456. For more information about ordering a product customized for your specific needs, contact Banner
Engineering Corp.
Some example models include, but are not limited to, the following:
Models
Description
DXM1200-X2
DXM1200-X2 Wireless Controller without a DX80 ISM radio
DXM1200-X2R1
DXM1200-X2 Wireless Controller with DX80 ISM 900 MHz radio
DXM1200-X2R2
DXM1200-X2 Wireless Controller with DX80 ISM 900 MHz MultiHop radio
DXM1200-X2R3
DXM1200-X2 Wireless Controller with DX80 ISM 2.4 GHz radio
DXM1200-X2R4
DXM1200-X2 Wireless Controller with DX80 ISM 2.4 GHz MultiHop radio
Cellular Communications
—Controllers accept Banner LTE-M (CATM1) modems only. Cellular modems are ordered
separately as accessories under the following part numbers:
LTE CAT-M1 AT&T (North America only):SXI-CATM1ATT-001
LTE CAT-M1 Verizon (United States only):
SXI-CATM1VZW-001
LTE CAT-M1/NB-IoT Multi-Carrier (Europe only):
SXI-CATM1WW-001
For more information, refer to the technical note Activating a Cellular Modem (p/n
DXM Hardware Configuration Overview
The DXM1200-X2 Wireless Controller can have multiple configurations. The DXM Controller will have a model number label
on the housing. Use the model number and model table above to identify which boards are included in the controller.
When opening the DXM Controller, follow proper ESD grounding procedures.
IMPORTANT:
Electrostatic discharge (ESD) sensitive device
ESD can damage the device. Damage from inappropriate handling is not covered by warranty.
Use proper handling procedures to prevent ESD damage. Proper handling procedures include
leaving devices in their anti-static packaging until ready for use; wearing anti-static wrist straps;
and assembling units on a grounded, static-dissipative surface.
The top housing contains the LCD display board. The display board is connected to the base board using a ribbon cable with
a 20-pin connector.
Summary of Contents for DXM1200-X2
