2 Compatible Hardware
2.1 PTL110
The PTL110 with PICK-IQ
™
is an indicator with the ability to change colors and animation styles to bring active attention to
a bin. The addition of the optional 3-digit LED display allows for quantities or scrolling messages. Optional inputs can be a
touch sensor on the indicator and/or a fixed-field sensor in the base. Low power methods allow for 64 devices to be wired
on one 24 V DC power source.
Family
PTL
T = Touch Sensor with Indicator
T
FF100 = 100 mm fixed field
FF100
D3 = 3-digit LED display
Blank = No display
D3
Display
Sensor
FF200 = 200 mm fixed field
Blank = No sensor input
L = Indicator only
QP150 = Dual 150 mm PVC cable with
4-pin M12/Euro-style quick disconnects
QP150
Connection*
Touch
–
–
* Models not connected in a series with a
quick disconnect require a mating cordset
Housing
S = PICK-IQ® Serial
Communication
Control
110
S
QPS150 = Dual 150 mm PVC shielded cable with
5-pin M12/Euro-style quick disconnects
Note: Address initialization requires a touch sensor. Adding the display option allows you to view the
Device ID, which makes set-up and maintenance easy.
Reference the following documents for further information about the PTL110:
PTL110S Pick-to-Light -- Datasheet
Original document PN
PTL110S Pick-to-Light -- Instruction Manual
Original document PN
PTL110S Pick-to-Light Device Registers
Original document PN
Pick-to-Light Solutions Guide
6
www.bannerengineering.com - Tel: + 1 888 373 6767
