6.1.1 Adjust the Focus on a Micro Video Lens Model
1. Use the supplied 1/16 in. hex key to loosen the Focusing Window locking screw (D), then adjust focus on the iVu
Series sensor using the clear Focusing Window (B).
2. Adjust focus while monitoring the focus number. To ensure the best image, adjust the
focus until the Focus Number peaks.
NOTE: Turning the Focusing Window counter-clockwise focuses on
closer objects, while turning the Focusing Window clockwise
focuses on more distant objects.
3. After the best image has been acquired, lock the focusing window.
Micro Video Lens Models
A
Lens
B
Focusing Window
C
Locking Clip
D Locking Screw
E
Filter Cap (optional)
F
Filter (optional)
NOTE: Filter Kits are available separately.
6.1.2 Adjust the Focus on a C-Mount Lens Model
1. Remove the Lens Enclosure.
2. Adjust focus while monitoring the focus number. To ensure the best image, adjust the focus until the Focus
Number peaks.
3. Replace the Lens Enclosure on the camera.
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164
57
