LAT-1 Laser Alignment Tool
®
Visible Laser Device for Aligning Light Screen and Grid Systems
Models
Features
• Totally self-contained visible-beam laser tool simplifies the alignment of any
opposed-mode sensor pair, especially in applications that include long distances or
corner mirrors
• Reduces the time required to align light screen systems and corner mirrors;
eliminates much trial-and-error guesswork when working with infrared beams
• Uses one common 9-volt battery (included)
• Built-in circular bubble level
• One 4" x 4" square of high-grade retroreflective target material included for easy
viewing of the laser spot at long distances
• Mounting clip (available separately or as part of a kit; see below) snaps squarely onto
the housings of Banner safety light screen/grid emitters and receivers
LASER LIGHT
REQUIRES ONE 9V BATTERY
DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.
REMOVE TWO PHILLIPS SCREWS FOR BATTERY ACCESS BELOW
Peak Power:
COMPLIES WITH 21 CFR PART
1040.10 AND EN60825-1; 1994
2.8mW, 640-660nm
33kHz 25% duty cycle
LAT - 1
AVOID EXPOSURE - LASER LIGHT
EMITTED FROM THIS APERTURE
Caution . . .
Laser Light Can Damage
Your Eyes
• View only the diffuse image of
the
laser beam where it strikes the
alignment target.
• Always view the laser image from
behind the LAT-1.
• Never look directly into the laser lens or
into a mirror reflection of the laser light
beam.
See alignment procedure for more
information. Failure to follow these
guidelines can result in vision damage.
!
Emitter/Receiver
Housing
LAT-1 with Clip(s) Kit
Clip Only
Model
P/N
Model
P/N
MINI-SCREEN
®
LAT-1-MS
71442
MSA-LAT-1
57708
MICRO-SCREEN
®
LAT-1-US
71443
USA-LAT-1
57709
EZ-SCREEN
™
LAT-1-SS
71445
EZA-LAT-2
71446
EZ-SCREEN
™
Type 2
LAT-1-LS
73745
LSA-LAT-2
73747
MINI-SCREEN
®
H.D.,
EZ-SCREEN
™
Grid or Point
LAT-1-HD
71444
EZA-LAT-1
66027
All of the Above
LAT-1
52150
–
–
PICO-GUARD™ SFP12
Safety Points
LAT-1-SFP12
71847
–
–
PICO-GUARD™ SFP30
Safety Points
LAT-1-SFP30
72999
–
–
REMOVE TWO PHILLIPS SCREWS FOR BA
TTER
Y ACCESS BELOW
DO N
OT S
TARE
INTO
BEA
M. C
LASS
2 LA
SER P
ROD
UCT.
AVOID EXPOSURE - LASER LIGHT
EMITTED FROM THIS APER
TURE
REQUIRES ONE 9V BA
TTER
Y
LASER LIGHT
LAT - 1
Peak
Pow
er:
2.8 m
W, 6
40-6
60nm
33kH
z 25%
duty
cycle
COM
PLIE
S W
ITH 2
1 CF
R PA
RT
1040
.10 A
ND E
N608
25-1
; 199
4
Emitter
Centerline
40 mm
(1.6")
21 mm
(0.8")
75 mm
(3.0")
75 mm
(3.0")
ON/OFF Switch
Snap-On Mounting Bracket
(Screws to Alignment Tool;
Snaps onto Light Screen Emitter or Receiver)
Circular Bubble
Level
Figure 1. Laser Alignment Tool features and dimensions
LAT-1-US shown
�������������������������
��������������������������������������
������������������������������
�����
�����
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
