October 18, 2023
LC25 Pro Controller Instruction Manual
8
•
•
Animation Settings
Animation
Description
Off
Device OFF, no animation displays
Steady
Color 1 is solid ON at the defined intensity
Flash
Color 1 flashes at the defined speed, color intensity, and pattern (normal, strobe, three pulse, SOS, or random)
Two Color Flash
Color 1 and Color 2 flash alternately at the defined speed, color intensities, and pattern (normal, strobe, three pulse, SOS, or
random)
Two Color Shift
Color 1 and Color 2 flash alternately on adjacent LEDs at defined speed and color intensities
Ends Steady
Color 1 defines the center 75% of the light. Color 2 defines the 12.5% of the light on each end. Center and ends are on steady.
Center proportion can be defined in
End Status
mode
Ends Flash
Color 1 defines the center 75% of the light. Color 2 defines the 12.5% of the light on each end. The ends will flash at defined speed
and pattern. Center proportion can be defined in
End Status
mode
Scroll
Color 1 defines a band 20% of the length of the light that moves in one direction up or down against the background of Color 2 at
the defined speed and color intensities
Center Scroll
Color 1 defines a band 10% the length of the light that moves from the center of the light to the ends against the background of
Color 2 at the defined speed and color intensity
Bounce
Color 1 defines a band 20% of the length of the light that moves up and down between the top and bottom of the light against the
background of Color 2 at the defined speed and color intensities
Center Bounce
Color 1 defines a band 10% the length of the light that moves from the center of the light to the ends and back against the
background of Color 2 at the defined speed and color intensity
Intensity Sweep
Color 1 continuously increases and decreases intensity between 0% to 100% at defined speed and color intensity
Two Color Sweep
Color 1 and Color 2 define the end values of a line across the color gamut. The light continuously displays a color by moving along
the line at the defined speed and color intensity
Color Spectrum
The light scrolls through the 13 predefined colors with a different color on each LED at the defined speed, Color 1 intensity, and
direction
Single End Steady
Color 1 is solid ON at the defined intensity on one end of the device
Single End Flash
Color 1 flashes at the defined speed, color intensity, and pattern (normal, strobe, three pulse, SOS, or random) on one end of the
device
By default, when the sub-applications for Machine and Work Cell are selected, Pro Editor opens
I/O State
configuration
in
Advanced
. Three
I/O states
are available:
I/O State Configuration Settings
Description
Basic
Configurations made in this state assign one wire to one state, with the following override control:
Pin 4 (Black) overrides Pin 1 (Brown)
Pin 2 (White) overrides Pins 1 and 4 (Brown and Black)
Advanced
I/O state with full seven state options for maximum configuration. Configurations made in Advanced assign
binary wiring combinations of all valid inputs to each state.
I/O Block
Three state control for use with I/O block. Configurations made in I/O Block assign states to the black,
white, and combination of black and white wires for use with I/O blocks for which power (brown) and
common (blue) are always on for five pin connections.
© Banner Engineering Corp. All rights reserved.