Figure 2. EZ-SCREEN LS Basic Safety Light Curtain cordset options
Euro QD Termination
Pigtail; requires mating QD
cordset for machine
connection
RD cordset with flying leads
Cable pivots as it exits
housing; bends to fit
against perpendicular
surfaces.
R 13 mm [0.5"]
min. bend
EZ-SCREEN LS Basic Pair model numbers include the following items:
Qty
Description
1
EZ-SCREEN LS Basic Receiver
1
EZ-SCREEN LS Basic Emitter
1
Test Rod STP-19 for 23 mm models
1
Diagnostic Label
Table 1: EZ-SCREEN LS Basic Safety Light Curtain Model Key
Product Family
System Type
Resolution
-
Defined Area
Termination
SLLV
E
= Emitter only
R
= Receiver only
P
= Pair (Emitter and
Receiver)
23
mm
350
= 350 mm
420
= 420 mm
630
= 630 mm
910
= 910 mm
1050
= 1050 mm
1190
= 1190 mm
1260
= 1260 mm
1330
= 1330 mm
1540
= 1540 mm
1820
= 1820 mm
Blank
= no pigtail, RD connection
Example: SLLVP23-350
To determine the components required for an EZ-SCREEN LS Basic Safety Light Curtain system using the Model Key:
1. Choose an Emitter (E), a Receiver (R), or a Pair (P) and resolution.
2. Choose a defined area.
3. Verify the model number(s) is available and listed in the models tables.
4. See
on page 62 for mating cordsets. Models with RD connection use either RDLS-8..D, DELS-11..E,
DELSE-81D, or DELSE-51D.
5. Choose the mounting brackets. See
on page 68.
6. See
on page 62 for additional cordsets, interfacing solutions, and accessories.
EZ-SCREEN
®
LS Basic Safety Light Curtain
www.bannerengineering.com - Tel: + 1 888 373 6767
11
