10 Accessories
10.1 Cordsets
Machine interface cordsets provide power to the emitter/receiver pair. Cordsets typically have yellow PVC cables and black
overmolds.
A removable disconnect (RD) is required to connect directly to the sensor housing. QD connectors are used for cable-to-
cable interconnections and connections to other devices.
Single-ended
(to connect to the machine interface):
RDLS-8..D
RD-to-flying leads is used with sensors without a 300 mm pigtail M12 QD
QDE-8..D
QD-to-flying leads is used with sensors with a 8-pin 300 mm pigtail M12 QD (model ends in P8)
QDE-5..D
QD-to-flying leads is used with sensors with a 5-pin 300 mm pigtail M12 QD (model ends in P5)
Double-ended
DEE2R-8..D
M12 QD-to-M12 QD (female-male) is used for extending the length of cordsets and directly connects to
other devices with a 8-pin M12 QD
DEE2R-5..D
M12 QD-to-M12 QD (female-male) is used for extending the length of cordsets and directly connects to
other devices with a 5-pin M12 QD
MQDEC-4..SS
M12 QD-to-M12 QD (female-male) is used for connecting to devices that do not have earth ground on pin
5 of a 5-pin QD (In such situations, earth ground must be provided via the mounting brackets)
DELSE-81D
RD-to M12 QD (male) is used to create or replace an 8-pin 300 mm pigtail M12 QD
DELSE-51D
RD-to M12 QD (male) is used to create or replace a 5-pin 300 mm pigtail M12 QD
Splitter cordsets
CSB-M128..M1281
allow easy interconnection between an 8-pin receiver and 8-pin emitter, and provides a single trunk
cable for the optional interchangeable ("swapable") hookup
CSB-M125..M1251
allow easy interconnection between a 5-pin receiver and 5-pin emitter, and provides a single trunk
cable for the optional interchangeable ("swapable") hookup
Note:
See
on page 36 for maximum cordset lengths.
EZ-SCREEN LS Connection Examples
Figure 41. 300 mm Pigtail with M12 QD
Figure 42. RD Connection with 8-Wire Flying Lead Cordset
10.1.1 Single-Ended (Machine Interface) Cables
Typically you use one cordset for each emitter and receiver.
RDLS-8..D 8-wire single-ended cordsets—Use RD-to-flying lead cordsets with sensors without a 300 mm cable M12 QD
Model
Length
Pinout/Color Code
Product Image
RDLS-815D
4.6 m (15.1 ft)
Brown: 24 V DC
Or/Bk: Fault
Orange: Emitter: ID in; Receiver: EDM
White: Emitter: no connection; Receiver: OSSD2
Black: Emitter: no connection; Receiver: OSSD1
Blue: 0 V DC
Gn/Ye: Ground/Chassis
Violet: Scan Code
RDLS-825D
8 m (26.2 ft)
RDLS-850D
15.3 m (50.2 ft)
EZ-SCREEN
®
LS Basic Safety Light Curtain
62
www.bannerengineering.com - Tel: + 1 888 373 6767
