Model
Description
UM-FA-9A
3 normally open (N.O.) redundant-output 6 amp contacts
UM-FA-11A
2 normally open (N.O.) redundant-output 6 amp contacts, plus 1 normally closed (N.C.) auxiliary contact
10.4 Safety Controllers
Safety Controllers provide a fully configurable, software-based safety logic solution for monitoring safety and non-safety
devices.
For additional models and XS26 expansion modules, see instruction manual p/n
(XS/SC26-2).
Table 8: Safety controller models
Non-Expandable Models
Expandable Models
Description
SC26-2
XS26-2
26 convertible I/O and 2 redundant solid state safety outputs
SC26-2d
XS26-2d
26 convertible I/O and 2 redundant solid state safety outputs with display
SC26-2e
XS26-2e
26 convertible I/O and 2 redundant solid state safety outputs with Ethernet
SC26-2de
XS26-2de
26 convertible I/O and 2 redundant solid state safety outputs with display and Ethernet
SC10-2roe
10 inputs, 2 redundant relay safety outputs (3 contacts each) (ISD and Ethernet compatible)
XS26-ISDd
26 inputs, 2 redundant solid state safety outputs with display, Ethernet, and 8 ISD channels
10.5 Muting Module
Provides the muting capability for the EZ-SCREEN LS Basic.
See Banner manual
for more information and additional cabling options.
Model
Description
MMD-TA-11B
DIN-mount Muting module
2 N.O. safety outputs (6 amps), 2 or 4 muting inputs, SSI, override input; IP20; terminal
connections
MMD-TA-12B
2 OSSD outputs, 2 or 4 muting inputs, SSI, override input; IP20; terminal connections
10.6 Interface Modules
Interface modules provide forced-guided, mechanically-linked relay (safety) outputs for the EZ-SCREEN LS Basic System
with an 8-pin interconnect (with EDM function). The interface module is required to be monitored by the EDM function and
should not be used with EZ-SCREEN LS Basic with a 5-pin interconnection (P5). See the referenced Banner datasheet for
more information.
Model
Description
Datasheet
IM-T-9A
Interface module, 3 normally open (N.O.) redundant-output 6 amp contacts, removable screw terminals
IM-T-11A
Interface module, 2 normally open (N.O.) redundant-output 6 amp contacts, plus 1 normally closed
(N.C.) auxiliary contact, removable screw terminals
SR-IM-9A
Interface module, 3 normally open (N.O.) redundant-output 6 amp contacts, spring clamp terminals
SR-IM-11A
Interface module, 2 normally open (N.O.) redundant-output 6 amp contacts, plus 1 normally closed
(N.C.) auxiliary contact, spring clamp terminals
10.7 Contactors
If used, two contactors per EZ-SCREEN LS Basic System that are monitored by the EDM circuit are required and should not
be used with the EZ-SCREEN LS Basic with a 5-pin interconnection (P5) model. See Banner datasheet p/n
for more
information.
EZ-SCREEN
®
LS Basic Safety Light Curtain
www.bannerengineering.com - Tel: + 1 888 373 6767
67