February 12, 2024
Q90R R-GAGE® Radar Sensor Instruction Manual
© Banner Engineering Corp. All rights reserved.
19
Teaching two separate points creates a window around that range.
Background Teach—Teaching the same point twice (points within 100 mm of each other) sets the switch point 200 mm in
front of the taught point.
Object Teach—Teaching the same point twice (points within 100 mm of each other) sets the switch point 100 mm behind the
taught point.
Window Teach—Teaching the same point twice (points within 100 mm of each other) sets a window ±50 mm on either side of
the taught point, for a total window size of 100 mm.
Use Sensitivity Selection to set the signal strength threshold.
Use Speed Selection to set the speed of the sensor.
Discrete Teach Modes
5.5.2
Set the Sensitivity
5.5.3
Access Sensitivity Selection.
Action
Result
Triple-pulse the remote input.
T
T
T
T
T
The green power LED flashes slowly.
1.
Select the desired signal threshold.
Action
Result
Pulses
TEACH Mode
1
T
Signal Strength Threshold = 1
The signal threshold is set and the
green power LED flashes equal to the
number of pluses, pauses, and then
flashes equal to the number of pulses
a second time. Then the sensor exits
remote teach and returns to run
mode.
2
T
T
T
Signal Strength Threshold = 2
3
T
T
T
T
T
Signal Strength Threshold = 3
4
T
T
T
T
T
T
T
Signal Strength Threshold = 5
5
T
T
T
T
T
T
T
T
T
Signal Strength Threshold = 10
6
T
T
T
T
T
T
T
T
T
T
T
Signal Strength Threshold = 15
7
T
T
T
T
T
T
T
T
T
T
T
T
T
Signal Strength Threshold = 20
8
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
Signal Strength Threshold = 30
2.
Set the Speed
5.5.4
Access Speed Selection.
Action
Result
Four-pulse the remote input.
T
T
T
T
T
T
T
The green power LED flashes slowly.
1.
Select the desired signal threshold.
2.
FINAL DRAFT
Summary of Contents for R-GAGE Q90R
Page 22: ...22 F I N A L D R A F T...
Page 28: ...28 F I N A L D R A F T...
