5-Pin Threaded M12/Euro-Style Cordsets—Double Ended
Model
Length
Style
Dimensions
Pinout (Male)
Pinout (Female)
DEE2R-5100D
30.5 m (100 ft)
4.2 Adapters and Other Accessories
Model
Description
SI-RFA-TS
SI-RF T-adapter for series connection, 4 pin to 8 pin to 4 pin
SI-RFA-TK
SI-RF T-adapter for connection of the reset button, 8 pin to 4 pin to 8 pin
SI-RFA-P
SI-RF Termination plug M12
SI-RFA-DM1
SI-RF Diagnostic Module with 8 digital outputs and 1 diagnostic circuit
Interfaces: IO-Link, USB 2.0
SI-RDA-DM2
SI-RF Diagnostic Module with 1 diagnostic circuit
Interfaces: IO-Link
4.3 Safety Controllers
Safety Controllers provide a fully configurable, software-based safety logic solution for monitoring safety and non-safety
devices. For additional models and XS26 expansion modules, see instruction manual p/n
(XS/SC26-2).
Non-Expandable Models
Expandable Models
Description
SC26-2
XS26-2
26 convertible I/O and 2 Redundant Solid State Safety Outputs
SC26-2d
XS26-2d
26 convertible I/O and 2 Redundant Solid State Safety Outputs with Display
SC26-2e
XS26-2e
26 convertible I/O and 2 Redundant Solid State Safety Outputs with Ethernet
SC26-2de
XS26-2de
26 convertible I/O and 2 Redundant Solid State Safety Outputs with Display and Ethernet
SC10-2roe
10 Inputs, 2 redundant relay safety outputs (3 contacts each) (ISD compatible)
4.4 ISD Connect Compatible Devices
The following tables list devices that can be directly connected to the ISD Connect via Quick Disconnect cables.
The following E-stops with Quick Disconnect connectors can be directly connected to the SSA-ISD-TCA using a
MQDEC-5xxSS or DEE2R-5xxD cable.
Model
Push Button
Housing
E-Stop Contacts
Connections
SSA-EB1P-02ECQ5A
Standard 40 mm
30 mm mount
2 NC
CH1 = pin 1 & 2,
CH2 = pin 4 & 5
SSA-EB2P-02ECQ5A
Large 60 mm
30 mm mount
2 NC
CH1 = pin 1 & 2,
CH2 = pin 4 & 5
SSA-EB1P-02ED1Q5A
Standard 40 mm
Flush mount
2 NC
CH1 = pin 1 & 2,
CH2 = pin 4 & 5
SSA-EB2P-02ED1Q5A
Large 60 mm
Flush mount
2 NC
CH1 = pin 1 & 2,
CH2 = pin 4 & 5
SSA-EB1PM-02ED1Q5A
Lockable 44 mm
Flush mount
2 NC
CH1 = pin 1 & 2,
CH2 = pin 4 & 5
SSA-ISD Connect with Indication
18
www.bannerengineering.com - Tel: + 1 888 373 6767
