P/N 134421
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Web Configurator
The SureCross™ DX80 Gateway Pro and DX83 Ethernet Bridge devices use an XML file to
configure the network. To access the XML file, use any web browser and enter the device’s IP
address into the browser’s address window:
http://192.168.0.1
The web configuration pages are arranged with a hierarchy of index tabs. The upper row of tabs
is the top of the hierarchy and selects a broad topic. Top level tabs open related tabs on the next
levels down. The middle tab selects a sub-topic, and the bottom tabs select individual pages
within the sub-topic. The bottom of each page includes a Quick Help section listing usage tips or
instructions specific to that page.
Before changing parameters...
...in the Web Configurator, go to the
RF Devices > Select Models
page.
Check the Get ALL box for all network
devices and click the Update button.
This retrieves all settings from the
devices and loads them in the Web
Configurator.
Save these settings by going to
System
> Setup > Config File
and clicking the
Save or Save As button to ensure
the configuration file contains the
most recent information stored on the
SureCross™ devices.
Tip
SureCross™ DX80 Web Configurator
Instruction Manual
Introduction
The XML file on any Ethernet Bridge or Gateway Pro does not necessarily contain the settings for
a specific wireless network. In many cases, the XML file saved in the Ethernet Bridge or Gateway
Pro is a default configuration file. Attaching the Ethernet Bridge or Gateway Pro to the radio network
does not automatically transfer network or device settings to the Ethernet Bridge or to the XML file.
When viewing real-time data returned to the browser by the connected device, the browser displays
the data received when the page displayed. At this time, update data by clicking the Refresh button
or the web browser’s Reload or Refresh button. Each time a page update is requested, new real-
time data displays.
For more information on specific SureCross components, please refer to the data sheets for the
SureCross devices:
• Gateways
• Line-Powered Nodes
•
Flex
Power™ Nodes
Additional reference guides are available at
www.bannerengineering.com/surecross
on a variety of
topics, including:
Literature Number
Topic
132113
A guide to antenna basics
132114
A guide to using Modbus with the SureCross products
133601
Samples of SureCross network configurations
133602
Running the Site Survey and interpreting the results
136689
A guide to SureCross network basics
136214
A guide to connecting sensors to DX80 devices
