P/N 134421
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SureCross™ DX80 Web Configurator
Instruction Manual
Advanced Tab
Advanced Tab
The
Advanced
tab contains options for scheduling, logging data, and setting up automatic alerts.
Scheduler Submenu
The
Scheduler
tab contains the pages for setting up weekly schedules, on demand schedules, and
any holidays requiring special schedules.
Weekly Schedule
Use the
Weekly Schedule
tab to manage weekly activities.
Weekly Schedule, Holidays Expanded View
Access the holiday expanded view by clicking the Holidays link on the main
Weekly Schedule
page.
The schedule entry affected shows on the first line. The remainder of the page allows you to add
and remove defined holidays from this schedule event.
Excluding Holidays
To exclude holidays from the scheduled event:
Select a holiday from the Available Holidays list.
Click the Add button.
Click on the Exclude radio button.
Once a holiday is added to the schedule, the scheduled event that normally happens on the
selected days will not occur if one of the selected days falls on one of the excluded holidays.
1.
2.
3.
Before setting any schedules,
verify the system’s time and date
are accurately set in the
System >
Setup > Time and Date
tab.
Tip
During the On Time, the On Value is applied to the given register. The remainder of the time, the
register is set to the Off Value. The On and Off Values are applied once at the start of the On
Time, when the system is rebooted, and when the system clock is changed (
System > Setup >
Time and Date
screen).
Astronomical Clock
The astronomical clock will not work unless latitude, longitude, and time zone are set in the
Time
and Date
tab.
To reference the astronomical clock instead of fixed time of day, enter DAWN or DUSK in place
of the HH:MM:SS on and off times. An offset in minutes may also be included. To specify one half
hour after sunrise, enter
dawn+30
. To specify one half hour before sunset, enter
dusk-30
, etc.
Upper/lower case is ignored, but do not include any spaces in the dawn/dusk string.
Duplicating and Schedule
Instead of duplicating a schedule entry to activate multiple outputs, make a single schedule entry
that applies to a single register then cascade that register to any number of other registers with
cascade rules set up on the
System > Action Rules > Cascade
page.
