66
P/N 134421
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SureCross™ DX80 Web Configurator
Instruction Manual
Advanced Tab
Cell Phone Text Messaging
To send a text message to a cell phone, enter the e-mail address in the following format:
10DigitNumber@CellCarrierDomain.com for SMS-to-text capable cell phones.
Carrier
Send e-mail to phonenumber@....
Alltel
@message.alltel.com
AT&T
@txt.att.net
Cingular
@mobile.mycingular.com
Nextel
@messaging.nextel.com
Sprint
@messaging.sprintpcs.com
SunCom
@tms.suncom.com
T-mobile
@tmomail.net
VoiceStream
@voicestream.net
Verizon
@vtext.com
Click the Send Test button to send a message to the defined recipient, testing the settings defined
for the POP3/SNMP servers as well as the DNS server. The most common problem is usually the
e-mail user and password setup or the system contact. Contact your network administrators for
questions concerning access to outside providers.
Sample Message
An example of a default auto-generated message is:
This is an automated e-mail alert originating from ‘Cooler System’ at ‘Winky’s Kitchen’
at 14:45:10 02/23/2006.
The event named ‘Freezer Failure’ with a test criteria of ‘Greater than or equal to’ a
value of 28.0000 tested true for register 44, ‘Freezer Temperature’ with a value of
33.0000.
Additional comments are as follows:
Somebody needs to call Chilly’s Freezer Service right away.
The equivalent auto-generated cell phone message is:
Cooler System/Winky’s Kitchen/Freezer Temperature/33.0000=Freezer Failure
The “report on false” version of the sample auto-generated cell phone message is:
Cooler System/Winky’s Kitchen/Freezer Temperature/27.0000#Freezer Failure
The true condition is indicated by (=) while the false or event resolved condition is indicated by (#)
between value and event name. Only the first 30 characters of each name field are included in the
message.
Error Codes
Error codes usually occur after briefly attempting to send an e-mail instead of right away. For a list
of possible error codes indicated by “Status,” refer to Appendix B - Error Codes.
Other Commands
Prev and Next buttons: Use the Prev and Next buttons to scroll through the three groups of e-mail
recipients.
Update button: Sends new data or settings to the Ethernet Bridge or Gateway Pro.
