P/N 134421
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SureCross™ DX80 Web Configurator
Instruction Manual
Examples
System Network Settings
Using the
System > Setup > Network
screen, set up the DX80 device by defining the IP address,
subnet mask, and gateway. Click on the Change IP button and reboot the system for the new IP
settings to take effect.
DNS Server
To use domain names instead of a static IP address, supply the IP address of at least one DNS
server (Static DNS1 or DNS2). The DNS server, at a static IP address, is a service that keeps track
of every Internet domain name and what IP address is associated with each domain. Changes to
the DNS server address take effect immediately.
DHCP
Set the IP address to 255.255.255.255 to use Dynamic Host Configuration Protocol (DHCP) to
obtain an IP address upon power-up. The IP address change takes effect on the next power cycle
or when the Restart button is clicked on the
Config File
page. When using DHCP, set the DNS1
and DNS2 addresses to 0.0.0.0 because the DHCP supplies the DNS addresses.
Dynamic DNS
Dynamic DNS allows the domain name data held in a name server to be updated when IP
addresses change. For example, the Internet domain name
www.bannerengineering.com
can be
assigned to a computer with a dynamic, or changing, IP address. Instead of every computer on the
Internet tracking all IP address changes, a Dynamic DNS service tracks the changes and directs
Internet traffic to the correct IP address. Most consumer ISPs use dynamic IP addresses. The
Dynamic DNS settings are required when using a dynamic IP address for your connection to the
Internet.
Reboot the system if the Change IP button was clicked.
1
2
1: The DX80 device IP address, subnet mask, and gateway.
2: When using an SMTP domain name in the e-mail setup page instead of an SMTP IP address,
enter at least one static DNS server IP address. The DNS server addresses are supplied by an
Internet Service Provider (ISP) or network administrator.
3. Select a dynamic DNS service and enter in the device’s host name, the DDNS user name, and
password.