DI1
DI2
A1+
A1-
A2+
A2-
V-
V-
V+
B+
A4-
A4+
DO1
DO2
A3+
A3-
Tx
Rx
DIx. Discrete IN x.
DOx. Discrete OUT x.
GND. Ground/dc common connection.
PWR. Power, 10 to 30V dc power connection.
RX/-. Serial comms line
TX/+. Serial comms line
V+. Power, 10 to 30V dc power connection.
V-. Ground/dc common connection.
Ax+ and Ax-. Analog IN x. Analog inputs for devices requir-
ing more than one connection, such as thermocouples or
RTDs. When there is no Ax-, use Ax+ as an analog input.
B+. 3.6 to 5.5V dc (for battery powered models only).
Wiring for DX80...E Radios
Connecting dc power to the communication pins will cause permanent damage.
The integrated battery DX80...E radios may also be powered by 10 to 30V dc. The power for the sensors can be supplied by the radio's
SPx terminals or from the 10 to 30V dc used to power the radio.
Integrated battery (RS-485)
(P1E, M-H1E Models)
Integrated battery (RS-232)
(P3E, P4E, M-H3E, M-H4E Models)
1
2
3
4 BAT
1
10 to 30V dc (optional)
10 to 30V dc (optional)
2
RS-485 / D1 / B / +
RS-232 Tx
3
dc common (GND)
dc common (GND)
4
RS-485 / D0 / A / -
RS-232 Rx
The BAT connection is a low voltage connection to the internal battery. Remove the internal battery if a low voltage source is connected
to the BAT terminal. When powering the device from the integrated battery, the BAT connection must remain open.
Terminal Block (IP54)
A4
A1
A3
A2
GND
A3+
PWR
DO1
DI1
A1-
A1+
A3-
A2-
A2+
A4+
GND
DI2
A4-
DO2
PWR
Ax+ and Ax-. Analog IN x. Analog inputs for devices requiring more than
one connection, such as thermocouples or RTDs. When there is no Ax-,
use Ax+ as an analog input.
DIx. Discrete IN x.
DOx. Discrete OUT x.
GND. Ground/dc common connection.
PWR. Power, 10 to 30V dc power connection.
Wiring Diagrams for Discrete Inputs
Connecting dc power to the communication pins will cause permanent damage. For the DX8x...C models, PWR in the wiring diagram
refers to V+ on the wiring board and GND in the wiring diagram refers to V- on the wiring board.
Discrete Input Wiring for PNP Sensors
Discrete Input Wiring for NPN Sensors
SureCross Performance FlexPower Node
6
www.bannerengineering.com - tel: 763-544-3164
P/N 155863_web
Rev. C
