Banner SureCross Performance DX80N9X2S-P3 FlexPower, Manual

Radio

General

ETSI/EN: In accordance with EN 300 328: V1.7.1
(2006-05)
IC: 7044A-DX8024

Spread Spectrum Technology

FHSS (Frequency Hopping Spread Spectrum)

Antenna Connection

Ext. Reverse Polarity SMA, 50 Ohms
Max Tightening Torque: 0.45 N·m (4 in·lbf)

Link Timeout

Gateway: Configurable
Node: Defined by Gateway

* With the 2 dB antenna that ships with the product. High-gain an-
tennas are available, but the range depends on the environment
and line of sight. To determine the range of your wireless network,
perform a Site Survey.

DX80 and DX80...C Mounting: #10 or M5 (SS M5 hard-
ware included)
DX80...E Mounting: 1/4-inch or M7 (SS M7 hardware
included)
Max. Tightening Torque: 0.56 N·m (5 in·lbf)

Interface

Indicators: Two bi-color LEDs
Buttons: Two
Display: Six character LCD

Wiring Access

DX80: Four PG-7, One 1/2-inch NPT, One 5-pin Euro-
style male connector
DX80...C: External terminals
DX80...E: Two 1/2-inch NPT

* For European applications, power the DX80 from a Limited Pow-
er Source as defined in EN 60950-1.

Inputs

Outputs

Discrete Input

Rating: 3 mA max current at 30V dc
Sample Rate: 1 second
Report Rate: On change of state

Discrete Input ON Condition

PNP: Greater than 8V
NPN: Less than 0.7V

Discrete Input OFF Condition

PNP: Less than 5V
NPN: Greater than 2V or open

Thermocouple Inputs

Sample Rate: 8 seconds
Report Rate: 32 seconds
Accuracy: 0.1% of full scale r 0.8° C
Resolution: 0.1° C, 24-bit A/D converter

Thermistor (used for CJC)

Model: BWA-THERMISTOR-001
Accuracy: 0.4° C (10 to 50° C); Up to 0.8° C (−40 to
+85° C)
Resolution: 0.1° C, 24-bit A/D converter

Discrete Output

Update Rate: 1 second
ON Condition: Less than 0.7V
OFF Condition: Open

Discrete Output Rating (Performance NMOS)

Less than 1 A max current at 30V dc
ON-State Saturation: Less than 0.7V at 20 mA

Output State Following Timeout

De-energized (OFF)

Environmental

Rating

DX80 models:IEC IP67; NEMA 6; (See UL section be-
low for any applicable UL specifications)
DX80...C models: IEC IP20, NEMA 1
DX80...E models: IEC IP54; NEMA 4

Conditions

Operating Temperature (P3 and P3C models): −40 to
+85° C (Electronics); −20 to +80° C (LCD)
Operating Temperature (P3E model): −40 to +65° C

Shock and Vibration

IEC 68-2-6 and IEC 68-2-7
Shock: 30g, 11 millisecond half sine wave, 18 shocks
Vibration: 0.5 mm p-p, 10 to 60 Hz

Refer to the SureCross

®

 DX80 Wireless I/O Network product

manual, Banner p/n 132607, for installation and waterproofing in-
structions. Operating the devices at the maximum operating condi-
tions for extended periods can shorten the life of the device.

SureCross Performance FlexPower Node

10

www.bannerengineering.com - tel: 763-544-3164

P/N 155863_web

Rev. C