Banner Engineering Corp. 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com
Wirelessly Connect the Banner Sensors GUI to an
R-GAGE or M-GAGE
S
ure
C
roSS
®
W
ireleSS
T
eChniCal
n
oTe
P
arTS
l
iST
• DB9RJ11-07 (83338) Cordset Assembly RJ11 to DB9 PC Interface
• DX80SR9M-H (44053) MultiHop Data Radio, qty 2
• DPB1 (02984) Programming box – Modified for pass-through function
• SP-DPB1 (72782) Power Supply for DPB1
• 24 V dc Power Supply for the Serial Radios, qty 2
Note: Contact the factory to have the DPB1 modified for pass through functions.
o
vervieW
This guide shows you how to use two MultiHop data radios to extend the range of the Banner Sensor GUI software for interfacing with
the M-GAGE and R-GAGE. The two data radios create a wireless RS-232 extension for the DB9RJ11-07 cable.
Note: This has been tested to work only with R-GAGE and M-GAGE sensors.
b_4158230
