P a g e
|
2
(A) 0414
Setup & Operating Procedure Continued…
4.
If the material spreads well but is not the desired thickness, adjust the front
brush accordingly (raise the brush for more material, lower the brush for less)
5.
Repeat steps 1-3, until the desired thickness is achieved. Once achieved, fill the
hopper up and top dress away!
Maintenance
As with any other product or machine, maintenance is a key measure that must be
taken in order to endure its longevity. With this in mind the Mini Topper should be
cleaned, thoroughly, after each use. Once cleaned, the bearings on both the drum and
rear wheel should be greased. This will keep the Mini Topper in top condition for years
to come
Warranty
Bannerman Ltd warrants all B-MTD-2012
Mini Toppers when applied and
installed, to be free from defects in material and workmanship under normal use
and service for a period of 90 days from date of use. This warranty does not
guarantee a particular service life of the products. Service life will vary with
application, operating environment, level of maintenance and other factors
beyond our control.
Bannerman Ltd’s sole responsibilities for the B-MTD-2012
Mini Topper or
parts determined to be defective and covered by this warranty is limited to
repairing the product or part.
**An allowance is to be applied to the labour cost for removal and replacement.**
Prior authorization from Bannerman Ltd must be obtained before replacing or
returning any part(s), or incurring any cost of labour. No charges for expense
incurred in parts, labour or transportation by unauthorized persons will be
allowed under this warranty. Bannerman Ltd reserves the right of any part or
Bannerman assembly (with transportation charges prepaid) claimed to be
covered under this warranty.
Bannerman Ltd shall not be liable, in event, for proximate, incidental,
consequential, special or other damages. This includes, but is not limited to,
damages for loss of production, loss of profit, loss of opportunity, or injury to
persons arising out of any breach in this warranty.
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
THE WARRANTY OF MERCHANTABILITY, WARRANTY OF FITNESS FOR
PARTICULAR PURPOSE, OR ANY OTHER WARRANTY EXTENDING
BEYOND THAT SET FORTH ABOVE
