Installations
Installing the Engine -
Fasten the engine together with the fuel
tank facing down. Be sure to fasten the engine mounting bolts
uniformly and secure.
Installing the throttle lever and connecting the throttle cable
-
Insert the throttle cable through the cable passage in the main
grip.
Engage the trip (A) of the throttle cable into the groove of the
throttle lever. Install the throttle cable into the throttle lever.
Using the adjuster that is located at the engine, adjust the
throttle cable so that the play is between 1mm and 2mm.
Installing the handle -
Slightly loosen the clamp on the throttle
lever and slip onto the hook handle. Slightly loosen the 4 bolts
in the handle joint (A) and insert the handle. Tighten the handle
joint (A) temporarily. After adjusting the handles to a
comfortable angle, fasten the 4 bolts uniformly. Tighten the
clamp on the thumb lever.
Installing the safety guard -
Using the 2 bolts, install the safety
guard. To position the safety guard properly, press the safety
guard against the edge of the gear case. Tighten both bolts
evenly and securely. To ensure safety, make sure that the
safety guard is in place during operation.
