Cautions during Operation
NOTE:
If necessary to cut where people or cards could be hit
by thrown, cut at a reduced (slow) throttle speed to reduce the
speed of the cutting head.
WARNING:
To avoid serious injury
Shut down immediately if the unit starts to shake or vibrate. This
could be a sign of danger from a broken part or missing
fasteners.
NOTE:
Disconnect the spark plug wire before you work on the
unit or leave it unattended.
WARNING:
To avoid serious injury
Always keep both hands on the control handles.
DO NOT
operate one-handed.
DO NOT
hold material you are cutting.
.
WARNING:
To avoid serious injury
After shutting down the engine, keep fingers and feet away from
the cutting head until all rotation stops.
DO NOT
put hands or feet near or under rotating parts
while the engine is running.
WARNING:
To avoid serious injury
NEVER
use wire in place of the nylon monofilament cutting line. The wire tip can
break off during cutting and become a dangerous missile.
