background image

Safety Information

 

 

 

 

2   BANZAI 59073 20120910

 

Warning!

To avoid the risk of serious injury or death;

• Adult supervision required.

• Adult assembly required.

• This product is intended to be used as a toy and 

not as a personal flotation device.

• Do not hang on, stand on or tackle this product.

• Do not use a high pressure pump to inflate.

• Do not over-inflate.

• Do not use electric air pump if water or moisture is 

present. This may result in electric shock.

• Use product in swimming pool only.

• Read all instructions before using this product.

• Never drive this product over other swimmers.

• Do not dive underneath this product.

• Disregard and not following the instructions from 

manual and warnings could result in injury or 
death, especially for children.

• Only for use in water in which the child is within its 

depth.

• Do not shoot water blaster cannon directly at 

person’s eyes or face.

While every attempt is made to embody the highest 
degree of protection in all equipment, we cannot 
guarantee freedom from injury. The user assumes 
all risk of injury resulting from use. All merchandise 
is sold on this condition, which no representative of 
the company can waive or change.

SAFETY CHECKLIST: READ BEFORE USING

Setup

1. The inflation and deflation of the product should 

be done by an adult or in the presence of an 
adult.

2. All inflatables are temperature sensitive, therefore 

never unfold or inflate in temperatures below 
50°F.

3. Once inflated, make sure that the product does 

not come in contact with stones, gravel or other 
sharp objects which could puncture the inflatable.

4. Do not use compressed air to inflate the product. 

Use a hand or foot pump. Do not over inflate.

5. Please inflate the air-chamber in correct 

sequence as shown. You should be able to see 
some crease at welding seams.

6. To inflate product, pinch the stem of the safety 

valve to allow air in. When fully inflated, close 
safety valve by pushing it down gently. To 
deflate, pull up safety valve and press stem 
together to let the air out.

7. To prevent premature material fatigue, refrain 

from exposing the product to sunlight unneces-
sarily. Over sun exposure may cause leakage.

Use

1. This is a toy and not a life saving flotation device. 

It should not be used as such.

2. Attention! This product should be used in water 

level no higher than the neck of a standing child 
and under adult supervision.

3. There should be a minimum of 6 ft (183cm) 

between the product rafts and the swimming pool 
wall to prevent the possibility of the child falling 
off and hitting their head on the edge of the pool’s 
wall.

4. Do not allow anyone to use this product who 

weighs over 100 lbs (45kg).

After use

1. Carefully deflate, dry, roll up and store this 

product when not in use.

2. Do not store this product indoors or in a closed 

container until it is completely dry.

3. Store this product in a secure place, away from 

children, to prevent suffocation.

Summary of Contents for PIRATE SHIP 59073









Reviews: