90326 Banzai
7
1.
1 x Inflatable Water Slide
2. 1 x Blower Motor
3. 1 x Water Spraying Hose Assembly
4. 3 x Blower Ground Stakes
5. 8 x Water Slide Ground 1 Extra
6. 1 x Carrying Bag
7.
4 x Repair Patches
8. 1 x Inflatable Basketball
8
PART LIST
BLOWER OPERATING INSTRUCTIONS
WARNING:
1.
Electrical current requirements:110-120VAC/60Hz
2. The power supply to the blower should include a reliable earth terminal and current leakage
protection device.
3. The power cord to the appliance should be clearly marked, so that persons using lawn mowers or
other types of equipment are aware that there is a cord on the ground.
4. The blower should never be left unattended when in use. The appliance is not to be used by children.
5. No objects should cover the air intake when the blower is in use. Sand, small stones or other objects
should not be allowed to be sucked into the blower.
6. Under no circumstances should a finger or any sharp object be inserted into the air intake.
7.
The power supply to the blower should not be exchanged for any other type of supply. If the power
supply is damaged, it should be repaired by a technician.
8. To avoid the danger of electrical shock, do not use the blower in the rain.
9. Do not use extension cords as this would present an electrocution hazard.
10. Do not leave the blower exposed to strong sunlight.
11. Children should not touch the blower. Children must not play on the product until the blower is
properly installed.
12. Children should not attach foreign objects to the blower that are not specifically designed for use with
the blower, such as, but not limited to jump ropes, clothesline, pet leashes, cables and chains as they
may cause a strangulation hazard.
13. Sudden gusts of wind may lift the product off the ground.
14. Blowers and electrical cords should be kept out of reach.
15. The product shall be inflated with the provided blower or with other manufacturer-specified
replacement blower.
INSTALLATION:
1.
Place the blower on the ground and then secure it by inserting the ground stakes into the
holes in the base.
2. The blower should be installed in a well-ventilated location and on a level surface.
3. The air input of the product (the long intake tube) is to be attached to the air output of the
blower and secured in place with a cord.
USING THE BLOWER:
1.
Plug the blower into a power supply.
2. To avoid electrical shock, never plug in or
unplug the appliance with wet hands.
3. The power supply should be
disconnected if the blower or the product
needs to be transported or moved.
4. There is an ON/OFF switch on the blower
body. Press “ I ” to switch on the blower,
and press “0” to switch off the blower.
INTENDED USE:
This product is only to be used for inflating the Surf ‘N Splash Water Park™. Household Use only.
1
5
6
7
2
3
4
BLOWER OPERATING INSTRUCTIONS
PART LIST
