44
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
BF-F8HP
DCS
DCS is set with menus 10 R-DCS and 12 T-DCS.
For a complete list of available DCS codes, see Table C.1, “DCS Codes” in Appendix C,
Technical specifications
.
Procedure 8.2. DCS setup how-to
1.
Press the
key to enter the menu.
2.
Enter
on the numeric keypad to get to receiver DCS.
3.
Press
to select.
4.
Enter desired DCS code on the numeric keypad.
5.
Press
to confirm and save.
6.
Enter
on the numeric keypad to go to transmitter DCS.
7.
Press
to select.
8.
Enter desired DCS code on the numeric keypad. Make sure it's the same code as that
you entered for receiver DCS.
9.
Press
to confirm and save.
10.
Press
to exit the menu system.
To turn DCS off, follow the same procedure but set it to off with the
key instead of
