13
10
.
Reverse
frequency
11
.
Narrow bandwidth:
N = narrow. When the wide (W) bandwidth is activated, no icon is displayed.
12.
Battery level indicator.
When the battery is almost used up, the icon starts blinking and the transmission is blocked.
Charge the radio.
13/17.
Depending on the setting, it will show the frequency in use, the channel name, the menu setting, etc
14/15.
Indicates the
VFO
in use and the current menu or function setting. This icon is displayed close to the band in use or to
the menu settings.
16/18. Indicates the
channel number
that you stored
Battery Level Indicator
When the battery level indicator reads
the battery is depleted. At this point the radio will start beeping periodically as
well as flash the backlight of the display and when voice prompts are enabled, a "Low Voltage" announcement will be heard,
indicating that you need to change your battery or put your radio in the charger.
4.3 Status Indications
The status LED has a very simple and traditional design.
LED Indicator
Radio Status
Constant Red
Transmitting.
Constant Green
Receiving.
4.4 Main keypad controls
•
[MENU]
key: It is used for activating the MENU, choose each MENU selection and confirm the parameter.
In standby mode, press and hold the key to switch between frequency (VFO) mode and channel (MR) mode.
To save frequencies to channel memory you must be in Frequency (VFO) mode. Memory mode is sometimes also referred to
as Channel mode.
•
▲
key: Press it for more than 2 seconds, the channel and frequency will move upwards rapidly; in SCAN mode, press this
Summary of Contents for Pofung P10UV Series
Page 1: ...USER S MANUAL...
Page 13: ...10 Chapter4 Radio Overview...
