23
Using the menu with short-cuts
a.
Press the
[MENU]
key to enter the menu.
b.
Use the numerical keypad to enter the number of the menu item.
c.
To enter the menu item, press the
[MENU]
key.
d.
For entering the desired parameter you have two options:
a).
Use the arrow keys as we did in the previous section; or
b).
Use the numerical keypad to enter the numerical short-cut code.
e.
And just as in the previous section;
a).
To confirm your selection, press
[MENU]
and it will save your setting and bring you back to the main menu.
b).
To cancel your changes, press
[Back]
and it will reset that menu item and bring you out of the menu entirely.
f.
To exit out of the menu at any time, press the
[Back]
key.
g.
All further examples and procedures in this manual will use the numerical menu short- cuts.
7.3 Functions and operations
(1) Squelch level (Squelch) - MENU No.0
Thanks to this function you can adjust the squelch in 10 different levels:
•
Level 0
: opened squelch. With this setting, P10UV will detect all signals, also the weakest ones, but will also receive the
background noise or undesired signals.
•
Levels 1- 9
: level 1 (lowest squelch level), level 9 (highest squelch level).
If the squelch is set to the highest level, the radio will receive the strongest signals only.
(2) Step frequency (Step) - MENU No.1
This function lets you select the desired frequency step.
The selectable steps are the following: 2.5/5.0/6.25/10.0/12.5/20.0/25.0/50.0 KHz
Note: in channel mode, this function cannot be modified.
Summary of Contents for Pofung P10UV Series
Page 1: ...USER S MANUAL...
Page 13: ...10 Chapter4 Radio Overview...
