More Programs
6-9
The Camera screen appears. Below the display area are indicators of the current
status.
2.
For camera controls such as brightness and zooming, tap
Menu
.
Menu Items
Menu Items
Menu Items
Menu Items
Descriptions
Descriptions
Descriptions
Descriptions
Mode
Three choices:
1.
Normal
2.
Burst
– Continuous shooting of 5 pictures
3.
Timer
– 5 second countdown before shooting
Brightness
Seven brightness levels
Resolution
Six choices from 160x120 to 2048x1536 (640x480 by
default)
Zoom
Available choices depend on the resolution.
White
Balance
Five choices from which you can select one that matches the
current light source.
Flash
Flash on or off.
Full Screen
Full screen on or off.
Options
Overall settings to the Camera program.
Flicker
Set to the frequency of the local electrical system (60Hz or
50Hz) for flicker free shooting where electrical lights exist.
Night Mode
On or off. Set to
On
for shooting in low light situations.
NOTE:
By default, the display area blanks out and shows the word “Standby” when
the camera has been idle for one minute. To resume, tap the screen.