ASSEMBLY INSTRUCTIONS
1.
Attach air blower onto the base with screw provided.
2.
Insert short brush onto center post of the base.
3.
Insert remaining brushes onto outer posts.
OPERATING INSTRUCTIONS
Note:
Glasses must be washed, rinsed and still damp when inserted into the glass polisher to get best results. Dry glasses
are difficult to polish.
1.
Plug power cord into grounded outlet.
2.
Press ON/OFF button to turn glass polisher ON.
3.
Grasp glass at the base and lower onto center brush, for GP-100 holding glass base stationary or with slight up and
down movement, or for GP-3 Mini holding glass base while twisting the glass, so the center brush dries and polishes
the inside of the glass and outer brushes dry and polish the outside of the glass.
4.
Remove glass from glass polisher.
5.
Press ON/OFF button to turn glass polisher OFF when not in use.
ON/OFF Button
Brushes
Short Brush
Air Blower
All manuals and user guides at all-guides.com
