BaracodaPencil 2 User Guide
© Baracoda 2006
Page 8/11
•
To a .txt file (default option). The BaracodaManager gives you the possibility to modify the name
of the file you may want to save the data to.
Note 1
: Scanner with special memory (15 000 barcodes – UPC format) can be order. Contact your
reseller for more information.
7.2.3 Time
Stamp
Time stamp can be configured (On/OFF, synchronise new time) by BaracodaManager and by
configuration barcodes
Time stamp will be in the following format: YYMMDDhhmmss:
YY: YEAR
MM: MONTH
DD: DAY
hh: Hours
mm: Minutes
ss: Seconds
7.3 Symbology
You can enable/disable and configure any type of barcode symbology with both the BaracodaManager
and the programming guide.
7.4 Data
format
The data format is the following: Tim B Suffix
7.4.1 Baracoda
Header
It is a proprietary data encapsulation. It is necessary to activate the Baracoda header in 2 cases:
•
to use the Baracoda keyboard emulation (Kemul) and Hyper terminal
•
to use the acknowledgment function.
You can configure Baracoda Header through BaracodaManager.
The Baracoda header is enabled in default settings
7.4.2 No data loss mode:
Baracoda has developed a proprietary communication protocol in order to enhance the security of the
Bluetooth transmission.
Every barcode sent to the host must be acknowledged by the host (until then, the scanner will transmit it
again and again).
This acknowledgment is disabled in default settings. It is strongly recommended to set this protocol
acknowledgment on when using the scanner with the BaracodaManager.
Additionally, this protocol acknowledgment allows having an audio acknowledgment that the barcode has
been successfully transmitted to the host.
You can configure or disable the scanner acknowledgement through BaracodaManager.
7.4.3 Prefix / suffix
You can add a prefix and/or a suffix to every barcode sent to the host device.
You can configure prefix/suffix through both BaracodaManager and programming guide.
There is no prefix/suffix in default settings
7.4.4 Barcode
Identifier
The scanner can transmit max. 3-digit barcode identifier code for different types of barcodes
(symbologies).
If the option is selected, the barcode identifier is added at the beginning of the barcode frame
