Baracoda D-Fly – User Guide v1.6
- 8 -
Data Capture
for Workforce
in Motion
4.3.
The different connection methods
There are two (2) different way to create a connection from a Host and a scanner:
-
Slave mode (by default)
The Host (PC, BaracodaManager, …) is creating the connection onto the scanner.
-
Master mode
The scanner is creating itself a connection to the recorded Host Bluetooth address. This connection
attempt is set after a scan of barcode. The configuration of Host address (on which the scanner will set
up a connection to) can be done:
o
Via BaracodaManager software (v3.35 min).
o
Via scan of barcodes.
All usage modes (Real Time, No Data Loss, Batch) are obviously available.
