TagRunners – Communication Protocol v1.4
- 14 -
Data Capture
for Workforce
in Motion
Code ID
0x94-0x95
Description
Set Beeps mode
Payload
1 byte:
{(Bit 0: Beep level; 0=low, 1=high)
(Bit 1: Read beep)
(Bit 2: ACK beep)
(Bit 7 = 0: ACK beep config select, =1: ACK beep config deselect)
(Bit 6 = 0: Read beep config select, =1: Read beep config deselect)
(Bit 5 = 0: Beep level config select, =1: Beep level config deselect)}}
Response
1 byte:
{(Bit 0: Success)}