page 9
If you experience a problem with your Tracker
™
, please follow the troubleshooting steps below to
restore performance. If further assistance is required, contact BARACUDA
®
After Sales Support Department at
1300 784 423. Please have your serial number and date of purchase available when you call.
Problem
Solution
Cleaner does not move
or moves slowly
(+25 seconds for
10 wheel revolutions)
• Confirm that the main drain is closed.
• Check for debris jammed in engine. Backwash filter and empty
pump basket.
• Check for air in system. If water level in pump basket drops or
you see excessive air bubbles in the pump basket or coming
from the return lines, there is air in the system. Tighten all fittings
at pump.
Cleaner patterns, does not
cover entire pool.
• Count Wheel Revolutions, flow may need to be adjusted via
AD Valve/Skimtrol plate.
• Ensure return fittings are directed down. Add a return diverter if
necessary.
• Make sure hose is not kinked or coiled. Lay in sun to straighten
if necessary.
• Verify correct hose float positioning on the leader hose.
• Observe the cleaner for more than five (5) minutes and ensure
that the drive track is going forwards smoothly. If it is not, contact
your dealer or service center for help.
• Confirm proper hose length.
Cleaner gets stuck at steps.
• Observe the cleaner for more than five (5) minutes and ensure
that the drive track is going forwards smoothly. If it is not, contact
your dealer or service center for help.
• Ensure the swivel on top of the cleaner rotates freely.
• Count Wheel Revolutions, flow may need to be adjusted via
AD Valve/Skimtrol plate.
• Confirm proper hose length. Shorten if necessary.
Cleaner won’t climb walls.
• Count Wheel Revolutions, flow may need to be adjusted via
AD Valve/Skimtrol plate.
• Verify correct hose float positioning on the leader hose.
Cleaner climbs too much
(-18 seconds for
10 wheel revolutions)
• Count Wheel Revolutions, flow may need to be adjusted via
AD Valve/Skimtrol plate.
• Verify correct hose float positioning on the leader hose.
Troubleshooting
