Baratza SETTE 30 How-To Download

Page: 1 / 4

How to: Motor/Gearbox Assembly Replacement

Sette 30, Sette 270, Sette 270W, Sette 270Wi

Time: 10 min

Difficulty: Easy

Tools/supplies: Torx 10 Driver (2mm hex key can be used)

Parts: Sette Motor/Gearbox Assembly (SKU S056 [110v] - S057 [220v])

Additional Resources: Case Removal

*** Unplug the grinder from power supply ***

www.baratza.com

support@baratza.com

rev. 5/23/2019

ver. 1.0

Remove the case using our Case Removal guide

Remove the hopper and adjustment ring from the unit.

Torx 10

2mm Hex

Pliers

Sette Motor Gearbox Assembly

110v SKU: S056

220v SKU: S057

Summary of Contents for SETTE 30

Page 1: ...Parts Sette Motor Gearbox Assembly SKU S056 110v S057 220v Additional Resources Case Removal Unplug the grinder from power supply www baratza com support baratza com rev 5 23 2019 ver 1 0 Remove the...

Page 2: ...not touch the exposed metal at the rear of the component Unplug the wires from the back of the motor Note how the wires are routed before removing the gearbox motor assembly for easiest reassembly Rem...

Page 3: ...or assembly Insert the new gearbox motor assembly and install the 4 screws Be careful not to pinch any wires Plug in the motor wires taking care to match the red wire with the red terminal Re install...

Page 4: ...on may change Add or remove shims as needed to adjust overall grind range See Shim Installation guide for reference To avoid potentially clogging the unit we advise grinding at a coarser setting at fi...