IF YOU NEED FURTHER SUPPORT:
In US & Canada contact
support@baratza.com
or 425-641-1245
or toll free 877-701-2021
If you think your grinder is not
performing correctly, go to our
troubleshooting guides at
baratza.com/troubleshooting
Outside North America, the warranty
is provided by the company you
purchased from. For service, find the
nearest importer at baratza.com/
international-importers-and-retailers
SAFETY INFORMATION:
Please read the information below very carefully.
It contains important safety information for this
appliance. Please keep these instructions for
future reference.
!
Use only with AC current and the correct voltage. See the label on the
base of the grinder to determine the correct voltage.
!
Only clean the grinder housing with a dry or slightly damp cloth. Do not
immerse the grinder, plug or cord in water or any other liquid.
!
Baratza will not accept any liability for damage, injury, or warranty if the
grinder is used other than for its intended purpose (i.e. grinding roasted
whole coffee beans) or is improperly operated or repaired.
!
Do not operate the grinder with a damaged cord or plug. If the supply
cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
!
Keep the appliance and its cord out of reach of children aged
less than 8 years.
!
Do not leave your grinder unattended while turned ON.
!
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
!
Cleaning and user maintenance shall not be made by children without
supervision.
!
Always unplug the grinder from the electrical supply before
assembling, disassembling or cleaning. To unplug, grasp plug and
remove from the outlet. Never pull on the cord.
!
CAUTION:
ALWAYS unplug the electrical supply cord prior to cleaning
the grinder.
PROGRAMMING
See operations manual for full details: baratza.com/documentation
Grind time is adjusted by rotating the dial. Clockwise rotation increases grind time in 1.0 second
increments, and counterclockwise rotation decreases grind time in 0.1 second increments. Rotate
clockwise until just above the desired time, then rotate counterclockwise to the setting.
The adjustment
range is a loop that continues from 40.0 to 1.0
. To manually grind, press the dial in for 3 seconds to enter
Pulse mode, then press and hold the dial to grind. Rotating the dial exits pulse mode.
CHOOSING A GRIND SETTING
Rotate the hopper to adjust to your desired grind setting. When
adjusting finer, the grinder must be running or completely empty
of beans to prevent the adjustment system from binding on
beans that are between the burrs. Below are some general settings to start with for a variety of brew
methods. You will need to dial in the grind to your preference from here.
Additional information can be
found at
Finer Grind = lower numbers
Coarser Grind = higher numbers
Do not fill the grounds bin above the indicated fill line or the grinder may become plugged and require unclogging.
Espresso
AeroPress
Hario V60
Automatic
Brewer
Chemex
French Press
Suggested Setting
8
12
15
18
20
28
