22
PROBLEM
POSSIBLE CAUSE
REMEDY
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
The coffee is not hot.
•
The cups were not pre-
heated.
•
The infuser has cooled
down because 2/3 minutes
have elapsed since the last
coffee was made.
•
Warm the cups by rinsing
them with hot water.
•
Before making coffee, heat
the infuser by pressing the
button (B8) (fig. 12).
The coffee is not creamy
enough.
•
The coffee is ground too
coarsely.
•
Wrong type of coffee
•
Turn the grinding adjust-
ment knob one click anti-
clockwise towards “1” while
the coffee mill is in opera-
tion (fig. 11).
•
Use a type of coffee for es-
presso coffee makers.
The coffee is delivered too
slowly or a drop at a time.
•
The coffee is ground too
finely.
•
Turn the grinding adjust-
ment knob one click anti-
clockwise towards “7” while
the coffee mill is in opera-
tion (fig. 11).
Continue one click at a time
until coffee delivery is satis-
factory.
The effect is only visible
after delivering two coffees.
