Note:
To save energy, the pilot-flame automatically extinguishes when the appliance
is not used for a period of 5 days. To avoid this, make two automatic start-
stop actions per week in program mode. See chapter
4.4
Change the settings
4.4.1
Set the temperature for the thermostatic mode
1. Push and hold the thermostatic mode button until the
thermostatic mode symbol appears and the temperature
flashes.
2. Use the up and down buttons to set the temperature.
3. Push the thermostatic mode button to store the
temperature or wait until the temperature stops to flash.
4.4.2
Set the program mode settings
Note:
• The temperature for the starting time in the program mode is the same as
the temperature that is set in the temperature mode.
• The set temperatures for the starting and stopping times of the appliance
are the same for each day.
• When the batteries are removed from the remote control, the set
temperatures, days and times are reset.
Default settings:
• Temperature when the appliance starts: 21 °C (70 °F).
• Temperature when the appliance stops: "--" (pilot light only).
1. Push and hold the program mode button until the
program mode flashes and 'ON' and the set temperature
appears.
2. Tap the program mode button to continue. The display
of the remote control shows 'OFF' and the temperature
flashes.
3. Use the up and down buttons to set the temperature for the stopping time of the
appliance.
4. Push the program mode button to store the temperature and to continue.
5. Use the up and down buttons to set the day(s) the
program is active.
Note:
'ALL' (every day), 'SA:SU' (saterday and
sunday), '1' (monday), '2' (tuesday), '3'
(wednesday), '4' (thursday), '5' (friday), '6'
(saterday) or '7' (sunday).
6. Push the program mode button to store the day.
7. Use the up and down buttons to select the hour on
which the appliance starts up.
8. Push the program mode button to store the hour.
ON
OFF
1 2
ON
1
Operation
20
Gas Fire Panorama 90-55
