7
Installation of the BOX
30
75 with steel base
7.1
Install the appliance
1. Put the appliance in the designated position. To put the appliance on a natural stone
2. Obey the safety distances. Refer to section
.
3. If necessary, put a nonflammable hearth under the appliance. Refer to section
.
4. Make sure that the flue connection on the appliance is correct in line with the flue
pipe to the ceiling.
5. Make sure the appliance is installed horizontally. Use a spirit lever.
7.2
Connect the optional external air supply
• The appliance has the possibility to connect a supply pipe for external combustion air.
During operation the appliance gets combustion air from this air duct.
• It is strongly recommended to install a valve in the external combustion air supply
pipe, to avoid debris in the pipe and to avoid water vapor condensation in the
appliance when not in use.
Connection on the rear of the appliance, refer to section
.
Connection on the bottom of the appliance, refer to section
.
7.2.1
Rear connection
1. Remove the round break out plate
at the rear of the appliance with a
hammer. Another round break out
plate is now visible.
Installation of the BOX30 75 with steel base
20
BOX 30 75
Summary of Contents for BOX30 75
Page 45: ...Warranty Terms BOX 30 75 45...
Page 46: ...Warranty Terms 46 BOX 30 75...
Page 47: ...Warranty Terms BOX 30 75 47...
