background image

8

CUATRO-3 90

Installation instructions

1.2    SAFETY AND INSTALLATION INSTRUCTIONS 

Safety

•  Do not place ! ammable objects within 150 cm of the appliance. Pay special attention  
  to furnishings and ornaments around the appliance.

•  When you use your appliance, the exterior will become hot. Always wear the glove  
  or use the accessories supplied when " lling etc. 
  Protect yourself and others (especially children#) from burns. Do not leave children  
  unattended when the appliance is burning.

•  Watch your clothing. Synthetic clothing in particular can easily catch " re and burn  
  intensely.

•  Do not approach the appliance with ! ammable materials or liquids. Any work with  
  solvents, adhesives etc. in the space heated by the appliance can be very 
  dangerous. 

•  It is not allowed to connect the appliance to a ! ue which is already connected to  
  another appliance.

•  Cheak the chimney. Cracks in the chimney may not only lead to damp, staining
  of walls and leaking of smoke, they can also impair the carrying off of smoke.

•  Prevent your chimney being soiled from above (birds’ nests etc.) by " tting a suitable  
  cap to the chimney pot.

•  Avoid chimney " res# Have your chimney swept at least once per year -   more often  
  if you use your " re a lot. Prevent excessive deposits of soot inside the chimney by  
  not burning freshly-cut wood. Instead, burn clean, dry chopped wood.

•  Follow the instructions issued by your local " re brigade.
  The appliance can be taken in operation if national and local regulations are satis" ed. 

The required constructive adaptations should be satis" ed as well.

•  It is essential that the appliance, the ! ue and combustion air supply are cleaned and 

inspected annually by a Barbas dealer/specialist.    

 

 

  The safe operation of the appliance will thus remain guaranteed.

•  The appliance is suitable and approved for periodical use.

Summary of Contents for CUATRO-3 90









































































































Reviews: