Barbeques Galore G4MALL Assembly & Instruction Manual Download

Page: 5 / 30

4 Safety, Assembly & Instruction Manual

POL FITTING

5/8” SAE THREAD

Barbeque

CONNECTION TO

REGULATOR

GAS CYLINDER

CONNECTION TO

REGULATOR

B. PRECAUTIONS

DO NOT OBSTRUCT ANY AIRFLOW PATH OR VENTILATION PATHS OF THE BARBEQUE

•

Do not obstruct any ventilation ports on the body or the hood of the barbeque.

•

The gas cylinder must be securely placed on the gas cylinder hook as supplied.

•

The gas cylinder must be kept out of direct sunlight and away from any heat sources.

•

During a gas cylinder swap or re-fill ensure that all control knobs are in the “

OFF

” position and

there are no naked flames in close proximity.

•

Gas hoses must NOT be twisted, kinked or under any form of tension. The gas hoses should hang

freely with no bends, folds, or kinks.

•

No part of the flexible hose should come into contact with any part of the barbeque that will

become hot during operation.

•

A regular inspection of the hose should be made to ensure that it is not cracking, breaking,

cutting or deteriorating in any other way.

•

Any damage to the hose requires an immediate replacement from your local agent or gas expert.

C. SIDE BURNER CONNECTION (IF FITTED WITH SIDE BURNER):

•

The side burner hose has already been fitted to the gas pipe-work on the

RIGHT HAND

side of

the main body.

•

The side burner connection is a

‘STANDARD RIGHT-HAND THREAD’

. A standard right-hand

thread is tightened in a

‘CLOCKWISE DIRECTION’

•

It is important that the side burner hose is not kinked, twisted or distorted.

•

The hose is already attached to the side valve, however this connection should be checked before

igniting the barbeque.

D. GAS CYLINDER CONNECTION:

•

Check that all the control knobs (including side burner) are in the “

OFF

” position before any

attempt is made to connect the regulator to the gas cylinder.

•

Double check that the gas cylinder valve is securely in the “

OFF

” position before attempting to

connect the regulator to the gas cylinder.

• When

making the connection of the regulator to the gas cylinder, it is important to note that the

regulator

fitting

‘LEFT HAND THREAD’

. A left hand thread is tightened in an

‘ANTI-CLOCKWISE

DIRECTION’

•

Should there be any concern in making the correct regulator connection please contact after

sales support helpline mentioned at the end of this manual.

Summary of Contents for G4MALL































Search results

Summary of Contents for G4MALL

Reviews:

Related manuals for G4MALL

Brands by name

Popular brands

Barbeques Galore G4MALL, Assembly & Instruction Manual

Search results

Summary of Contents for G4MALL

Reviews:

Related manuals for G4MALL

Brands by name

Popular brands