6. Attach the EZ Prompter to you camera.
7.
Be sure to support the weight of your
camera while doing this step
. Using the allen
wrench (d) provided, Loosen the allen screws,
and adjust the LCD Mount so you EZ Prompter
has the appropriate height and distance from
your monitor.
8. This is how your set-up will look like.
9. Line up your EZ Prompter to your LCD
monitor. The middle of the LCD Monitor should
reflect in the middle of the lens.
10. Tilt the unit and put a pen under it, This is
how you will find the balance point. Move the
unit back and forth until you find the balance
point.
